Single Board Computers
epub |eng | 2020-01-15 | Author:Parr, Kent [Parr, Kent]

There are also buttons and case plugs that needs to be connected to the motherboard to function properly, a double wide row of pins, the location of which will be ...
( Category: PCs February 13,2020 )
epub |eng | 2019-12-09 | Author:Dan Aldred [Dan Aldred]

RUNNING YOUR PROGRAM To run your program, follow these steps: Turn on your radio and tune it to the broadcast frequency, which in this program is 100.0 MHz. Press F5 ...
( Category: Electrical February 10,2020 )
epub |eng | | Author:Mark Cunningham

You may be wondering what these timer numbers actually equate to in real time. Look to the very bottom of the Snapper code, and you will see the lineclock.tick(60) In ...
( Category: Single Board Computers January 24,2020 )
epub |eng | | Author:Third Edition

Now you'll create some Python code that will allow you to access both the DC motors on your tracked platform. Here is some basic code that allows you to do ...
( Category: Single Board Computers January 23,2020 )
epub |eng | 2016-10-05 | Author:Patrick Mulder

Proximity If you want to build a robot, one common approach for obstacle detection is an ultrasonic distance meter. Johnny-Five has a nice module to work with proximity detectors. Look ...
( Category: Embedded Systems November 29,2019 )
epub, pdf |eng | | Author:Stephen Smith

Adding with Carry Revisited In Chapter 2, “Loading and Adding,” we gave sample code to add two 64-bit numbers using ADDS and ADC instructions. What was lacking from this example ...
( Category: Hacking October 26,2019 )
epub |eng | 2015-08-26 | Author:John Baichtal

Figure 7-19. Cut slits in the stays to accommodate the dropouts Braze the un-slit ends of the seat stays to the appropriate lugs built into the bottom bracket (Figure 7-20). ...
( Category: Electronics October 24,2019 )
epub |eng | 2015-05-13 | Author:Robert Davis [Davis, Robert]

On each LED bend the shorter or negative lead at about 1/4 inch or just above the funny spot in the lead. Put 8 of them into the template. Bend ...
( Category: Electronics October 14,2019 )
epub |eng | 2018-08-28 | Author:Ting, Chen-Hanson [Ting, Chen-Hanson]

.DW '0' RJMP PLUS ; EXTRACT ( n base -- n c ) ; Extract the least significant digit from n. ; COLON 7,"EXTRACT" EXTRC: RCALL DOLIT .DW 0 RCALL ...
( Category: Single Board Computers October 5,2019 )
epub |eng | 2018-01-18 | Author:Bosworth, Jim [Bosworth, Jim]

What is the difference between Python version 2 and Python version 3? Python 2 is the version of python that was released in the year 2000, while Python 3 was ...
( Category: Tools October 4,2019 )
epub |eng | 2015-01-27 | Author:Sargent, James K. [Sargent, James K.]

sudo apt-get install ntfs-3g 04 Detecting mounted devices It’s necessary to set up all the mount points for each of the hard drives we have attached to the Pi, and ...
( Category: Microprocessors & System Design October 4,2019 )
epub |eng | 2018-01-14 | Author:McCarthy, Steve [McCarthy, Steve]

If you have not already done this, insert the SD card into the computer. Etcher will detect it automatically. If you have inserted more than one SD card, you will ...
( Category: Microprocessors & System Design October 4,2019 )
epub |eng | 2017-10-16 | Author:Smith, Jake & Smith, Jake [Smith, Jake]

I used the common OSMC distribution in this guide; it’s based on Kodi and has a native support for OMXPlayer. It also comes with a slick user interface that makes ...
( Category: Single Board Computers October 4,2019 )
epub |eng | 2016-11-14 | Author:Hendrix, Jared [Hendrix, Jared]

Chapter 8: Sample Project Idea s After learning the basics of Raspberry Pi, its specification, installation and programming, it is time for you to go out and try those projects. ...
( Category: Single Board Computers October 4,2019 )